Quick Test: Introduction: Description
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
QUICK TEST checks integrity and function of EEC-V powertrain control system and outputs test results upon demand. QUICK TEST also provides a quick end-check of powertrain control system and is usually performed at start of each diagnostic procedure. It is also performed at end of most diagnostic tests for verification of repair and to make sure no other faults were incurred while servicing a previous fault. All self-tests are completely menu driven in NGS tester. QUICK TEST is made up of 8 functional tests of EEC-V system. To avoid misdiagnosis, always perform VISUAL CHECK and VEHICLE PREPARATION & EQUIPMENT HOOKUP before performing the following procedures in sequence: