LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2435 (Interior Trim And Ornamentation) >> Removal And Installation >> D-Pillar Trim Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the quarter trim panel. For additional information, refer to QUARTER TRIM PANEL .
    2. NOTE: To avoid damage to the D-pillar trim panel, remove any retaining clips from the body and attach them to the D-pillar trim panel before installing.
  2. Remove the D-pillar trim panel by pulling straight outward to release the retaining clips.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals