LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2434 (Drum Brake System) >> General Procedures >> Brake Shoe Adjustment >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) SPECIFICATION

G06094436Courtesy of FORD MOTOR CO.
 Brake Adjustment Gauge 206-D002
(D81L-1103-A) or equivalent
  1. Remove the brake drum. For additional information, refer to BRAKE DRUM .
  2. Using the Brake Adjustment Gauge, measure the inside diameter of the brake drum.
    Fig 1: Measuring Inside Diameter Of Brake Drum
    G06094437Courtesy of FORD MOTOR CO.
  3. Position the Brake Adjustment Gauge on the brake shoes and linings and adjust accordingly.
    Fig 2: Positioning Brake Adjustment Gauge On Brake Shoes And Linings
    G06094438Courtesy of FORD MOTOR CO.
  4. Install the brake drum. For additional information, refer to BRAKE DRUM .
scientia non olet · About LEMON Manuals