Rear Ride Height Measurement
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
REAR RIDE HEIGHT MEASUREMENT DESCRIPTION CHART
| Item | Description |
|---|---|
| 1 | Ride height = 3-2 |
| 2 | Measurement 2 |
| 3 | Measurement 3 |
NOTE:
Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.
- Measure the distance between the flat level surface and the center of the shock absorber lower bolt (measurement 2).
- Measure the distance between the flat level surface and the center of the lower arm inner bolt (measurement 3).
- Subtract measurement 2 from measurement 3 to obtain the rear ride height.
- Refer to SPECIFICATIONS .