LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2421 (Engine System - General Information) >> General Procedures >> Piston To Cylinder Bore Clearance

Piston To Cylinder Bore Clearance

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to appropriate article in Engine for the specification.
  1. Subtract the piston diameter from the cylinder bore diameter to find the piston-to-cylinder bore clearance.
scientia non olet · About LEMON Manuals