LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2421 (Engine System - General Information) >> General Procedures >> Hydraulic Lash Adjuster Inspection

Hydraulic Lash Adjuster Inspection

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the hydraulic lash adjuster and roller follower for damage. If any damage is found, inspect the camshaft lobes and valves for damage.
    Fig 1: Identifying Damage Hydraulic Lash Adjuster
    G06094793Courtesy of FORD MOTOR CO.