LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2421 (Engine System - General Information) >> General Procedures >> Cylinder Bore Cleaning >> Material

Cylinder Bore Cleaning: Material

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION

Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent		 WSS-M2C930-A
    NOTE: If these procedures are not followed, rusting of the cylinder bores may occur.
  1. Clean the cylinder bores with soap or detergent and water.
  2. Thoroughly rinse with clean water and wipe dry with a clean, lint-free cloth.
  3. Use a clean, lint-free cloth and lubricate the cylinder bores.
    • Use clean engine oil meeting Ford specification.
scientia non olet · About LEMON Manuals