LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2415 (Manual Transaxle And Clutch - General Information) >> Diagnosis And Testing >> Manual Transaxle and Clutch >> Verify Customer Concern >> Inspect the Gearshift Mechanism

Inspect the Gearshift Mechanism

WARNING: This page is about a different car, the 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the cables for:
    • signs of damage.
    • broken locks.
    • binding.
    • cables not fully seated or in hold-down brackets.
    • hold-down bracket nuts are loose.
    • correct routing.
    • correct adjustment.
    • If the concern is a gear(s) cannot be selected, adjust the cables. Refer to GEARSHIFT CABLE ADJUSTMENT .
  2. Inspect the gearshift for:
    • free play in the gearshift lever (must be no more than 5 mm [0.196 in]). This specification is for an absolute or "no load" free play.
      • If the gearshift lever free play is too great, check the gearshift cables and repair as necessary.
      • If the gearshift lever free play is OK, adjust the gearshift linkage.
scientia non olet · About LEMON Manuals