Other Concerns: No Engine Braking In Manual Low Position

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSTIC ROUTINES REFERENCE

Possible Component	Reference/Action
260 - ELECTRICAL ROUTINE
No electrical concerns
360 - HYDRAULIC/MECHANICAL ROUTINE
Main Control Valve Body
Bolts out of torque specification	Tighten bolts to specification.
Gaskets and separator plate - damaged, off location	Inspect for damage. Install new as required.
Low/reverse regulator valve, springs, clips - loose, stuck, binding, missing, misassembled	Inspect for damage. Repair or install new as required.
Low/reverse boost valve, springs, clips - loose, stuck, binding, missing, misassembled	Inspect for damage. Repair or install new as required.
Shift Solenoid D (SSD) not functioning correctly	Activate solenoid using scan tool. Refer to OUTPUT STATE CONTROL (OSC) MODE . GO to PINPOINT TEST A . Install a new solenoid as required. Refer to SOLENOIDS . Download a new solenoid body strategy into the PCM. Refer to SOLENOID BODY STRATEGY .
Low/Reverse Clutch Assembly
Seals - damaged	Inspect for damage. Install new as required.
Piston - damaged	Inspect for damage. Install new as required.
Friction - damaged, worn	Inspect for damage. Install new as required.
Cylinder hub - damaged	Inspect for damage. Install new as required.
Return spring assembly - damaged	Inspect for damage. Install new as required.