LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2412 (Driveline System - General Information) >> Diagnosis And Testing >> Driveline System >> Principals of Operation >> Driveshaft Center U-Joint and CV Joint Inspection >> Driveshaft Center Bearing

Driveshaft Center Bearing

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING . Rotate the driveshaft by hand. If the bearing shows signs of roughness or is noisy, install a new driveshaft assembly. Refer to DISASSEMBLY AND ASSEMBLY .

scientia non olet · About LEMON Manuals