Luggage Compartment Lid Alignment
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the luggage compartment lid struts.
- Loosen the 4 luggage compartment lid hinge-to-body bolts.
- Adjust the luggage compartment lid as necessary.
- For additional information, refer to BODY REPAIRS .
- Tighten the 4 luggage compartment lid hinge-to-body bolts.
- Tighten to 25 Nm (18 lb-ft).
- Install the luggage compartment lid struts.