LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2391 (Windows And Glass - Glass, Frames And Mechanisms) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test E: A Single Power Window is Inoperative - Fusion, Milan, LH Front >> Notes

Pinpoint Test E: A Single Power Window is Inoperative - Fusion, Milan, LH Front: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the appropriate SYSTEM WIRING DIAGRAMS article for schematic and connector information.

NOTE: A new LH front power window motor will not operate in one-touch up mode until initialized. Refer to WINDOW MOTOR INITIALIZATION .
NOTE: The LH front power window motor must be initialized whenever a new motor is installed.
NOTE: The LH front power window motor must be de-initialized, then initialized whenever the LH front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.