LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2390 (Instrument Cluster Illumination And Panel Illumination) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
  2. Release the tabs and remove the switch bezel assembly.
    • Disconnect the electrical connectors.
    NOTE: The switch bezel assembly is removed by releasing tabs and pushing out from behind.
  3. Release the 2 tabs and remove the instrument panel dimmer switch from the switch bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals