LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2389 (Fuel Tank & Fuel Lines) >> Removal And Installation >> Fuel Lines >> Notes

Fuel Lines: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Fuel Lines Replacement Components With Torque Specifications
G06271103Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 W707142 Heat shield nut (2 required)
2 54017 Heat shield
3 W707142 Heat shield nut (2 required)
4 020602 Heat shield
5 9G271 Vapor jumper tube
6 - Vapor jumper tube-to-vapor tube quick connect coupling (part of 9G271)
7 9J280 Fuel jumper tube
8 - Fuel jumper tube-to-fuel tube quick connect coupling (part of 9J280)
9 - Hybrid fuel tube bundle shield (part of 9J279)
10 - Hybrid fuel tube bundle shield pin-type retainer (part of 9J279)
11 5884 Lower crossover support brace
12 W580415 Lower crossover support brace nut (4 required)
13 - Fuel tube bundle retaining clip (part of 9J279) (9 required)
14 9J279 Fuel tube
15 - Fuel tube-to-Fuel Pump (FP) module quick connect coupling (part of 9J279)
16 9J279 Vapor tube
17 - Vapor jumper tube-to-vapor tube quick connect coupling (part of 9J279)
18 9J279 Vapor jumper tube
19 - Vapor jumper tube-to-Evaporative Emission (EVAP) canister quick connect coupling (part of 9J279)
20 - Stone shield (part of 2A815)
21 2A815 LR parking brake cable assembly
22 W505263 Rear parking brake cable assembly bolt