Fuel System
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The fuel system consists of:
- a 2-speed Mechanical Returnless Fuel System (MRFS).
- a standard L-shaped fuel tank.
- an Easy Fuel TM (capless) fuel tank filler pipe assembly, which cannot be modified in any way.
- a Fuel Pump (FP) module containing:
- an electric FP, which provides pressurized fuel to the fuel rail.
- a serviceable fuel level sender.
- a check valve, which maintains system pressure after the FP is shut off.
- a pressure relief valve for overpressure protection in the event of restricted fuel flow.
- a lifetime fuel filter providing filtration to protect the fuel injectors from foreign material.
- fuel, vapor and brake tubes in an integrated bundle assembly attached to the underside of the vehicle by retaining clips.
- has a supplemental refueling adapter located in the luggage compartment.
- a FP control module.