LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2384 (Body System - Uni-Body, SUBFRAME & Mounting System) >> Removal And Installation >> Subframe - Front >> 3.0L

Subframe - Front: 3.0L

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Subframe Replacement Components With Torque Specifications - Front (3.0L)
G06271647Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 W520416 Front subframe nuts (4 required)
2 3C496 Front subframe support bracket bolts (4 required)
3 5884 Subframe support bracket
4 W500545 Roll restrictor bolt
5 W506410 Electronic Power Assist Steering (EPAS) ground wire bolt
6 5C145 Front subframe
7 - EPAS  jumper harness connector (part of 3F720)
8 6E5C Tie-rod end nut (2 required)
9 5A552 Front subframe washers