LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2358 (Manual Transaxle) >> Specifications >> Secondary Shaft Gear Shim Thickness Specification Table

Secondary Shaft Gear Shim Thickness Specification Table

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SECONDARY SHAFT GEAR SHIM THICKNESS SPECIFICATION TABLE

mm Inch
0.20 0.007
0.25 0.009
0.30 0.011
0.35 0.013
0.40 0.015
0.45 0.017
0.50 0.019
0.55 0.021
0.60 0.023
0.65 0.025
0.70 0.027
scientia non olet · About LEMON Manuals