LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2357 (Automatic Transaxle External Controls (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Installation

Selector Lever Knob: Installation

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the selector lever knob on the selector lever and install the screws.
    Fig 1: Identifying Selector Lever Knob & Selector Lever Knob Bezel
    G06275791Courtesy of FORD MOTOR CO.
  2. Slide the selector lever knob bezel up and install it on the selector lever knob.
    Fig 2: Sliding Selector Lever Knob Bezel Up
    G06275793Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals