LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2351 (Seat System - Seats) >> Removal And Installation >> Heated Seat Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front passenger seat. For additional information, refer to SEAT - FRONT .
  2. Remove the heated seat module from the cushion electrical bracket.
    • Disconnect the 2 heated seat module electrical connectors.
    • Remove the rivet and heated seat module.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals