LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2351 (Seat System - Seats) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test AC: DTC B19A1 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The Dual Climate Controlled Seat Module (DCSM) supplies a speed control signal voltage to the passenger seat cushion Thermo-Electric Device (TED) on circuit VHS23 (BN/BU). The TED  blower is supplied operating voltage from DCSM  output circuit CHS08 (BN/YE) and ground from DCSM  output circuit RHS08 (VT/WH).

This pinpoint test is intended to diagnose the following: