LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2350 (HVAC - Climate Control System) >> Removal And Installation >> Register - Center, MKZ >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center instrument panel finish panel. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Detach the RH and LH center register clips and remove the RH and LH center registers.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals