LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2350 (HVAC - Climate Control System) >> Removal And Installation >> Heating Ventilation Air Conditioning (HVAC) Module - MKZ >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Front Display Interface Module (FDIM). For additional information, refer to REMOVAL AND INSTALLATION (Fusion, Milan) and REMOVAL AND INSTALLATION (MKZ) .
  2. Remove the 2 HVAC module screws.
  3. Disconnect the 2 HVAC module electrical connectors.
  4. Remove the HVAC module.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals