LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2350 (HVAC - Climate Control System) >> Removal And Installation >> Blower Motor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

MKZ vehicles 

  1. Remove the RH lower instrument panel insulator.

    All vehicles 

  2. Disconnect the blower motor electrical connector.
  3. Remove the 3 blower motor screws.
  4. Remove the blower motor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals