LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2350 (HVAC - Climate Control System) >> Removal And Installation >> Blower Motor Speed Control >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

MKZ vehicles 

  1. Remove the RH lower instrument panel insulator.

    All vehicles 

  2. Disconnect the blower motor speed control electrical connector.
  3. Remove the blower motor speed control screw.
  4. Remove the blower motor speed control.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals