LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2349 (Engine Cooling System (Except Hybrid)) >> Specifications >> General Specifications Table

General Specifications Table

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS TABLE

Item Specification
Pressure Tests 
Complete cooling system maximum pressure 124 kPa (18 psi)
Pressure relief cap 89-124 kPa (13-18 psi)
Radiator (out of vehicle) 138 kPa (20 psi)
Thermostat Opening Temperatures 
Thermostat starts to open (2.5L) 80-84°C (176-183°F)
Thermostat starts to open (3.0L) 84-88°C (183-190°F)
Thermostat starts to open (3.5L) 86°C (187°F)
Thermostat fully open (2.5L) 97°C (207°F)
Thermostat fully open (3.0L) 99°C (210°F)
Thermostat fully open (3.5L) 96°C (205°F)