LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2347 (Information System And Entertainment System) >> Removal And Installation >> Speaker - Instrument Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable tool such as a trim removal tool, remove the instrument panel speaker cover.
    NOTE: For THX® sound, pry the speaker cover at the front, then lift.
  2. Remove the screws (2 for vehicles without THX® sound, 3 for THX® sound) and the instrument panel speaker.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals