Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure applies to the MKZ with Premium Sound only. For all other amplifiers, refer to the appropriate procedure(s).
- Remove the 4 pushpins and the RH luggage compartment trim panel.
- Disconnect the audio amplifier electrical connectors.
- Remove the 3 bolts and the audio amplifier.
- To install, tighten to 9 Nm (80 lb-in).
- To install, reverse the removal procedure.