Battery and Cables
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Vehicles are equipped with a 12-volt, maintenance-free battery.
The battery and cable system consists of the following components:
- Battery
- Battery cable assembly
- Battery tray
The battery is a 12V DC source connected in a negative ground system. The battery case is sealed with 2 vent holes to release gases. The battery has 3 major functions:
- Engine cranking power source
- Voltage stabilizer for the electrical system
- Temporary power source when electrical loads exceed the generator output current
Ford Motor Company strongly recommends that lead-acid batteries be returned to an authorized recycling facility for disposal.