LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2337 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Pedal and Bracket - Hybrid >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS TABLE

G06064936Courtesy of FORD MOTOR CO.
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent diagnostic tool
Fig 1: Identifying Brake Pedal & Bracket Replacement Components With Torque Specifications - Hybrid
G06269642Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 2L523 Brake booster push rod clevis locking pin
2 - Brake pedal angle sensor electrical connector (part of 14290)
3 - Simulator cut off valve solenoid electrical connector (part of 14290)
4 - Simulator fluid pressure sensor electrical connector (part of 14290)
5 W520112 Brake booster nut (4 required)
6 W505263 Brake pedal and bracket upper bolts (2 required)
7 W505263 Brake pedal bracket bolt (2 required)
8 2455 Brake pedal and bracket assembly
9 2468 Brake pedal bracket