LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2328 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Removal And Installation >> Message Center Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH instrument panel trim.
  2. Press the upper headlamp bezel retaining clips from the back of the bezel and push the headlamp switch out of the instrument panel.
    • Disconnect the electrical connectors.
      NOTE: Once the top of the headlamp switch bezel is released from the instrument panel, rotate the headlamp switch bezel and switches out from the top of the bezel to release lower retaining tabs.
  3. Press the retaining tabs and remove the message center switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals