LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2328 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Instrument Panel Cluster (IPC) >> IPC Configuration Parameters - Hybrid

IPC Configuration Parameters - Hybrid

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
IPC CONFIGURATION PARAMETERS REFERENCE TABLE

Customer Preference Parameter As-Built Parameter
- ABS
- Average fuel economy metric display type
- Autolamp delay
- Autolock
- Auto-unlock
- Belt-Minder®
- Cluster plant mode
- Compass
- Cross traffic
- Daytime illumination
- Default oil life
- Electronic stability control/Roll Stability Control (RSC®) warning
- Flex-fuel
- Fuel tank size
- Gallon display type
- IKT
- Key-in-ignition warning chime
- Language
- MyKey
- Navigation
- Number of fuel senders
- Number of fuel tanks
- Overspeed warning chime (gulf coast countries)
- Park aid front
- Park aid rear
- Side detect
- Speedometer calibration
- Traction control/interactive vehicle dynamics/RSC®
- Transmission Control Module (TCM)
- Tire Pressure Monitoring System (TPMS)
- Transmission type (manual/automatic)
- Units (English/metric)
- Vehicle brand (Ford/Mercury)
- 2-Wheel Drive (2WD)/Four-Wheel Drive (4WD)/All-Wheel Drive (AWD)