LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2326 (Exterior Lighting System) >> Removal And Installation >> Reversing Lamp >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pin-type retainers and the luggage compartment trim panel.
  2. Disconnect the electrical connector(s).
  3. Remove the 3 nuts (Milan) or 7 nuts (MKZ) and the reversing lamp.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals