Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The front parking/turn lamp on non-Hybrid vehicles equipped with a 2.5L or 3.0L engine can be accessed without removing any components.
- For Hybrid vehicles, remove the battery tray. For additional information, refer to REMOVAL AND INSTALLATION .
- For vehicles equipped with a 3.5L engine, remove the air cleaner. For additional information, refer to REMOVAL AND INSTALLATION .
- Disconnect the parking/turn lamp electrical connector.
- Remove the front parking/turn lamp socket from the headlamp assembly.
- Remove the front parking/turn lamp bulb.
- To install, reverse the removal procedure.