LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2320 (Power Steering System) >> Removal And Installation >> Tie Rod - Inner >> Material

Tie Rod - Inner: Material

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE

Item Specification
Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) ESA-M1C75-B
NOTE: Hydraulic Power Assist Steering (HPAS) shown in illustration, Electronic Power Assist Steering (EPAS) similar.
Fig 1: HPAS Inner Tie Rod Replacement Components With Torque Specifications
G06257256Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 3280 Hydraulic Power Assist Steering (HPAS) inner tie-rod end (also part of 3332B service kit)
1 - Electronic Power Assist Steering (EPAS) inner tie-rod end (part of 3280 service kit)
2 3K745 HPAS inner bellows boot clamp (also part of 3332B service kit)
2 - EPAS  inner bellows boot clamp (part of 3280 service kit)
3 3K661 HPAS bellows boot (also part of 3332B service kit)
3 - EPAS  bellows boot (part of 3280 service kit)
4 3C650 HPAS outer bellows boot clamp (also part of 3332B service kit)
4 - EPAS  outer bellows boot clamp (part of 3280 service kit)
5 W713882 Tie-rod jam nut (all)
6 3A130 Outer tie-rod end (all)
7 W302124 Outer tie-rod end nut (all)
8 W302420 Cotter pin (all)
9 - Retaining washer (Hydraulic Power Assist Steering (HPAS) only) (part of 3280 and 3332B service kit)