LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2315 (Steering System - Electronic Power Assist Steering (EPAS)) >> Interactive Diagnostics >> DTC / Symptom Selection >> DTC Index - Power Steering Control Module (PSCM) >> DTC U2100: Initial Configuration Not Complete >> Action

DTC U2100: Initial Configuration Not Complete: Action

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

ATTEMPT to CONFIGURE the PSCM using programmable module installation (PMI) refer to MODULE CONFIGURATION SYSTEM . Otherwise, CONFIGURE the PSCM using vehicle as-built data. Clear the DTC and repeat the self-test. If the DTC returns install a new EPAS gear referring to STEERING GEAR -- 3.5L FRONT WHEEL DRIVE (FWD) , STEERING GEAR -- 3.5L ALL WHEEL DRIVE (AWD) or STEERING GEAR -- 2.5L NON-HYBRID AND 3.0L FRONT WHEEL DRIVE (FWD) .