Diagnostic Aids
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
This DTC alone does not indicate a fault in the PSCM. It indicates an overtemperature condition due to ambient conditions and/or a heavy load on the EPAS system. A heavy load is defined as multiple parking lot maneuvers over a short duration of time with low tire pressure or towing for long distances followed by multiple parking maneuvers.
The thermistor used by the PSCM is calibrated for 80| C (176| F) and as ambient temperature decreases, so does the accuracy of the sensor. At room temperature and lower, the sensor will be +/- 20| C (68| F).