LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2310 (HVAC - Climate Control System - General Information And Diagnostics (Except Hybrid)) >> Diagnosis And Testing >> Climate Control System >> Pinpoint Tests >> Pinpoint Test H: DTCs U3003:16 and 17 >> Notes

Pinpoint Test H: DTCs U3003:16 and 17: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the appropriate SYSTEM WIRING DIAGRAMS article for schematic and connector information.

Refer to the appropriate SYSTEM WIRING DIAGRAMS article for schematic and connector information.

NOTE: DTC U3003 can be set if the vehicle has been recently jump started, the battery has been recently charged or the battery has been discharged. The battery may become discharged due to excessive load(s) on the charging system from aftermarket accessories or if the battery has been left unattended with the accessories on.
NOTE: Carry out a thorough inspection and verification before proceeding with the pinpoint test. Refer to INSPECTION AND VERIFICATION .