LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2297 (Automatic Transaxle - 6F35) >> In-Vehicle Repair >> Transaxle Support Insulator - Anti-Roll >> Removal

Transaxle Support Insulator - Anti-Roll: Removal

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the screws and the underbody cover.
    Fig 1: Locating Screws And Underbody Cover
    G06278611Courtesy of FORD MOTOR CO.

    Vehicles equipped with a 3.0L engine 

  3. Remove the Y-pipe. For additional information, refer to EXHAUST SYSTEM .

    All vehicles 

  4. Remove the 2 bolts and remove the roll restrictor.
    Fig 2: Locating Bolts And Roll Restrictor
    G06278612Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals