LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2297 (Automatic Transaxle - 6F35) >> In-Vehicle Repair >> Halfshaft Seal - RH, All Wheel Drive (AWD) >> Removal

Halfshaft Seal - RH, All Wheel Drive (AWD): Removal

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the Power Transfer Unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU) .
  3. Using a suitable awl, poke a small hole in the RH transaxle differential seal.
    Fig 1: Installing Awl In RH Transaxle Differential Seal
    G06278541Courtesy of FORD MOTOR CO.
  4. Using a suitable dent puller, remove the halfshaft seal.
Fig 2: Removing Halfshaft Seal
G06278542Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals