LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2297 (Automatic Transaxle - 6F35) >> Description And Operation >> Transaxle Electronic Control System >> Brake Pedal Position (BPP) Switch

Brake Pedal Position (BPP) Switch

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The Brake Pedal Position (BPP) switch tells the PCM when the brakes are applied. The BPP switch closes when the brakes are applied and opens when they are released. The BPP signal is used for the brake shift interlock actuation.

scientia non olet · About LEMON Manuals