LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2296 (Automatic Transaxle - AISIN Aw21) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Assembly

Torque Converter Hub Seal: Assembly

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the torque converter hub seal in place.
    Fig 1: Positioning Torque Converter Hub Seal In Place
    G06264088Courtesy of FORD MOTOR CO.
  2. Using the Fluid Pump Seal Installer, install the torque converter hub seal.
    Fig 2: Installing Torque Converter Hub Seal
    G06264089Courtesy of FORD MOTOR CO.
  3. Install the torque converter.
    Fig 3: Locating Torque Converter
    G06264090Courtesy of FORD MOTOR CO.
  4. Install the transaxle. For additional information, refer to TRANSAXLE .
scientia non olet · About LEMON Manuals