Special Tool(s)
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS TABLE
| Fluke 77-IV Digital Multimeter FLU77-4 or equivalent | |
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent diagnostic tool |
Anytime an electrical connector or solenoid body is disconnected, inspect the connector for pin condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.
Prior to carrying out the pinpoint tests, check the following:
- Transmission fluid level
- Transmission fluid condition (burned, metal particles or discolored)
- Engine cooling system
- Other non-related transmission DTCs