LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2292 (Engine Mechanical - 2.5L (Except Hybrid)) >> Assembly >> Engine >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS TABLE

G06262211Courtesy of FORD MOTOR CO.
 Aligner, Clutch Disc 308-006 (T71P-7137-H)
G06262212Courtesy of FORD MOTOR CO.
 Alignment Plate, Camshaft 303-465 (T94P-6256-CH)
G06262213Courtesy of FORD MOTOR CO.
 Aligner, Crankshaft Sensor 303-1417
G06262214Courtesy of FORD MOTOR CO.
 Compressor, Piston Ring 303-D032 (D81L-6002-C)
G06262215Courtesy of FORD MOTOR CO.
 Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
G06262216Courtesy of FORD MOTOR CO.
 Heavy Duty Floor Crane 014-00071 or equivalent
G06262217Courtesy of FORD MOTOR CO.
 Holding Tool, Crankshaft Damper 303-1416
G06262218Courtesy of FORD MOTOR CO.
 Installer, Camshaft Front Oil Seal 303-096 (T74P-6150-A)
G06262219Courtesy of FORD MOTOR CO.
 Installer, Connecting Rod 303-462 (T94P-6136-AH)
G06262220Courtesy of FORD MOTOR CO.
 Installer, Crankshaft Rear Main Oil Seal 303-328 (T88P-6701-B1)
G06262221Courtesy of FORD MOTOR CO.
 Spreader Bar 303-D089 (D93P-6001-A3) or equivalent
G06262222Courtesy of FORD MOTOR CO.
 Timing Peg, Crankshaft TDC 303-507
scientia non olet · About LEMON Manuals