DTC P2131: Throttle/Pedal Position Sensor/Switch F Circuit Range/Performance
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P2131: THROTTLE/PEDAL POSITION SENSOR/SWITCH F CIRCUIT RANGE/PERFORMANCE
| Description: | The accelerator pedal position (APP) sensor fault flag is set for sensor 3 by the powertrain control module (PCM), indicating the signal is out of the normal self-test operating range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An APP3 sensor PID reading may indicate a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DK . | ||