LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P1506: Idle Air Control (IAC) OVERSPEED Error

DTC P1506: Idle Air Control (IAC) OVERSPEED Error

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1506: IDLE AIR CONTROL (IAC) OVERSPEED ERROR

Description:  This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is greater than the desired RPM.
Possible Causes: 
  • IAC circuit short to ground
  • Damaged IAC valve
  • IAC valve stuck open
  • Intake air leak after throttle body
  • Vacuum leaks
  • Damaged EVAP system
Diagnostic Aids:  Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST KE .
scientia non olet · About LEMON Manuals