LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P1285: Cylinder Head Over Temperature Condition

DTC P1285: Cylinder Head Over Temperature Condition

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1285: CYLINDER HEAD OVER TEMPERATURE CONDITION

Description:  Indicates an engine overheat condition was sensed by the cylinder head temperature (CHT) sensor.
Possible Causes: 
  • Low engine coolant level
  • Base engine concerns
  • Engine cooling system concerns
  • CHT sensor concern
Diagnostic Aids:  On some applications when this fault occurs the engine temperature warning indicator illuminates or forces the temperature gauge to the full H (hot) zone. The warning indicator can be triggered by either grounding the engine temperature warning circuit when wired to the powertrain control module (PCM), or by sending a PCM network message to the instrument cluster (IC).
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DL .