LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0721: Output Shaft Speed (OSS) Sensor Circuit Range/Performance

DTC P0721: Output Shaft Speed (OSS) Sensor Circuit Range/Performance

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0721: OUTPUT SHAFT SPEED (OSS) SENSOR CIRCUIT RANGE/PERFORMANCE

Description:  The OSS sensor signal is very sensitive to noise. This noise distorts the input to the powertrain control module (PCM).
Possible Causes: 
  • Wiring misrouted
  • Aftermarket add-on
  • Wiring damaged
  • Wiring insulation wear
Diagnostic Aids:  Check the routing of the harness.
Check the wiring and the connector for damage.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
Manual Transmission - - GO to PINPOINT TEST DP .
Automatic Transmission Refer to the Diagnostic Trouble Code (DTC) Index in the appropriate AUTOMATIC TRANSMISSION/TRANSAXLE article to continue diagnosis.