LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0108: MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH

Description:  Sensor operating voltage is greater than 4.96 volts. As a result it failed above the maximum allowable calibrated parameter.
Possible Causes: 
  • VREF short to voltage
  • MAP signal short to voltage
  • VREF should be less than 6.0 volts
  • Open circuit
Diagnostic Aids:  The VREF voltage should be between 4.0 and 6.0 volts.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
Flex GTDI,
MKS 3.5L,
MKT 3.5L,
Taurus GTDI		 GO to PINPOINT TEST DN .
All others GO to PINPOINT TEST DM .
scientia non olet · About LEMON Manuals