DTC P0096: Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0096: INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | The powertrain control module (PCM) continuously monitors this sensor for concerns. This DTC sets when the intake air temperature 2 (IAT2) parameter identification (PID) does not correlate with the charge air cooler temperature (CAC_T) or the intake air temperature (IAT) PIDs at ignition on. It will also set if the IAT2 PID exceeds the maximum calibrated temperature threshold while driving. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | The MAP/IAT2 sensor is located on top of the intake manifold. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST EA . | ||