LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2283 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> U0100 (TCM) - Lost Communication With Electronic Control Module (ECM)/Powertrain Control Module (Pcm) A

U0100 (TCM) - Lost Communication With Electronic Control Module (ECM)/Powertrain Control Module (Pcm) A

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
U0100 (TCM) - LOST COMMUNICATION WITH ELECTRONIC CONTROL MODULE (ECM)/POWERTRAIN CONTROL MODULE (PCM) A

Description:  The transaxle control module (TCM) continuously monitors controller area network (CAN) for messages from the powertrain control module (PCM). This DTC sets when TCM stops receiving PCM messages for a set amount of time.
Possible Causes: 
  • CAN circuit
Diagnostic Aids:  Check for other PCM DTCs or PCM related symptoms. Diagnose all other PCM DTCs or PCM related symptoms first.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QA .